Anchor Windlass controll relay box with on-off switch and wireless receiver. I can now walk around and activate the anchor windlass with a wireless remote control. The red handled switch is mounted to the left and the wireless receiver is the little box on the right.	Here is my first try at splicing and eye loop and rope onto a chain. When you run all chain the end of the chain must have a rope snubbed into the chain just in case a whale or something grabs the chain and pulls it all the way out. When the rope comes out I can cut it in an emergency... A whale could pull the whole ship under water. I also need to keep a hatchet close by the bow..