Aft Cabin - 2007

After Jim and I did the fiberglassing, I painted it with 2 coats of polyamid epoxy. The next step is insulating the whole cabin.


Here is the view looking to the starboard side as you come in the door.	Here is the port side looking aft. That weird looking tube you see there is the gooseneck for the wet exhaust system.


Here is the bulkhead. The hole you see is for the exhaust tube to come through.	Here is a floor cleaned up and ready for its mahogany floor. Sorry.. There is the goose neck again.


Here is the aft section, ready for insulation..	Gnettie and Ii worked all day and got about 2/3 competed. After the styrofoam is glued into place, foam is sprayed to seal the edges.


Here is the ceiling all done.	The back section, with spray foam done.


Insulation on aft section.	Port Side Complete


Porthole roughed in...	Here is the port bed roughed in. Now I have some place to put all the stuff!


Side view of the beds position.